Feed aggregator
NASA Study of Pristine Meteorite Adds to Story of Ancient Asteroids
6 min read
NASA Study of Pristine Meteorite Adds to Story of Ancient Asteroids C1 clasts in Hillsborough: On the left is a back-scattered electron image with two C1 748 clasts circled. On the right, an X-ray map of the same area as (A), indicating Na enrichment in 749 of the C1 clasts relative to the bulk of Hillsborough. Credit: NASA/SETI
A meteorite recovered immediately upon its fall to Earth on July 16, 2024, is helping NASA scientists uncover new clues about ancient water, the chemical evolution of primitive asteroids, and the ingredients that may have helped make life possible throughout the early solar system.
This rapid recovery began when an amateur astronomer in New Jersey quickly recognized that a newly fallen meteorite had landed on his property. Recognizing its scientific value and wearing protective gloves, he collected the fragments and stored them in aluminum foil and glass containers, which preserved delicate minerals and organic compounds that are often altered by moisture, weather, and contamination.
As the meteorite fell to Earth, cameras across New Jersey captured its fiery passage through the atmosphere. Scientists used these observations to reconstruct the fireball’s trajectory and, after recovering the meteorite, combined this data with laboratory analyses to determine where in the solar system the rock most likely originated. In a study published Wednesday in the journal Science Advances, researchers found evidence that ancient salty water altered minerals within the meteorite’s parent asteroid, preserving unique minerals and a rich inventory of organic compounds.
“When we have both a documented fireball and a quick recovery of its meteorite, we can learn not only what the rock is made of, but where it came from in the asteroid belt,” said Peter Jenniskens, meteor astronomer at both NASA’s Ames Research Center in California’s Silicon Valley and the SETI Institute, and lead author of the study.
Combined radar detections from the Hillsborough meteorite fall. The green line shows the fireball’s projected path, while colored radar signatures show falling meteorite fragments drifting east-northeast with prevailing winds. Credit: NASA/Marc Fries
Named for the township where it was recovered, the Hillsborough meteorite belongs to a class of carbon-rich meteorites known as CM carbonaceous chondrites. These primitive rocks preserve some of the oldest materials in the solar system, recording the chemical processes that shaped asteroids more than 4.5 billion years ago.
While examining the unusually pristine meteorite, researchers found a mosaic of tiny broken-up rocks and noticed that some contained unusually high concentrations of sodium — an unexpected finding for this type of meteorite. The surprising signal prompted a closer investigation using powerful electron microscopes that allowed scientists to examine the meteorite from the millimeter scale down to individual atoms. By combining observations across multiple scales, researchers reconstructed the history of the minerals and the fluids that once flowed through them.
These analyses revealed microscopic fractures filled with sodium-rich material left behind by ancient brines. Unlike pure water, brines contain dissolved salts that allow them to transport elements and chemically alter the rocks they move through. In the case of the Hillsborough sample, those ancient fluids altered the asteroid’s minerals and left behind chemical evidence that remained preserved for billions of years.
Scientists were also able to detect fragile sodium-carbonate salts that normally react with moisture in Earth’s atmosphere before they can be studied. Jangmi Han, a paper co-author and mineralogist at NASA’s Johnson Space Center in Houston, identified evidence of ancient brines preserved within microscopic fractures. Similar salts were identified in samples returned from the asteroids Bennu and Ryugu by NASA’s OSIRIS-REx mission and JAXA’s (Japan Aerospace Exploration Agency) Hayabusa2 mission. However,Hillsborough marks the first time the salts have been identified in a CM carbonaceous chondrite meteorite, offering a new glimpse into the surfaces of the primitive asteroids that produced these meteorites.
Together, these findings suggest that ancient, salt-rich brines were more widespread among primitive asteroids than previously recognized, and provide scientists with new opportunities to compare how water altered different asteroid bodies across the early solar system.
“The chips of the most salt-rich bits of this meteorite are quite comparable to the samples returned by the Hayabusa2 and OSIRIS-REx missions,” said Mike Zolensky, a meteorite researcher at NASA Johnson and co-author of the study. “They’re not identical. They’re different in some very interesting ways, but they’ve seen very similar processes.”
Following the history of water through the solar system is an essential part of understanding the origin of life.Mike Zolensky
Meteorite Researcher
Scientists expected Hillsborough to contain a rich suite of organic compounds because it is a CM carbonaceous chondrite. What made the meteorite exceptional was how quickly it was recovered, allowing researchers to study those compounds before prolonged exposure to Earth’s environment could contaminate the sample.
“One of the big surprises for me when we analyzed a small chip of the Hillsborough meteorite was the complexity of amino acids and other organic compounds,” said Danny Glavin, senior scientist in the Astrobiology Analytical Laboratory at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, and co-author of the study.
Its diversity of amino acids and other organic compounds is, comparable to the Murchison meteorite, a nearly 100-kilogram carbonaceous chondrite that fell in Australia in 1969 and became the benchmark for extraterrestrial organic chemistry.
“It’s just more proof that the chemical building blocks of life could have been delivered — and are still being delivered — to Earth today by these carbonaceous asteroid fragments,” said Glavin, who was a co-investigator on OSIRIS-REx, leading an international team that studied the organic composition of the samples delivered to Earth from asteroid Bennu in 2023.
Understanding the Hillsborough meteorite required expertise from multiple scientific disciplines.
Astronomers reconstructed the meteorite’s journey through space, finding evidence that it may have originated from the Erigone asteroid family in the inner asteroid belt, home to the asteroid Donaldjohanson, which was visited in 2025 by NASA’s Lucy spacecraft. Mineralogists identified evidence of ancient brines preserved within microscopic fractures, while organic chemists analyzed the meteorite’s inventory of amino acids and other organic compounds.
“Together, those complementary studies are helping scientists build one of the clearest pictures yet of how primitive asteroids such as the asteroid Erigone evolved chemically over billions of years,” said Jenniskens.
Researchers continue to study the Hillsborough meteorite, revealing new details about how water transformed primitive asteroids and shaped the early solar system.
By tracing the history of water on primitive asteroids, scientists are learning how water and the chemical ingredients for life were distributed throughout the early solar system.
“If you follow the water through the solar system, you’re actually following life,” Zolensky said. “Following the history of water through the solar system is an essential part of understanding the origin of life.”
For more information on NASA’s astromaterials research and exploration, visit:
https://science.nasa.gov/astromaterials
Karen Fox / Molly Wasser
Headquarters, Washington
240-285-5155 / 240-419-1732
karen.c.fox@nasa.gov / molly.l.wasser@nasa.gov
Victoria Segovia
NASA’s Johnson Space Center, Houston 281-483-5111
victoria.segovia@nasa.gov
Share
Details Last Updated Jul 16, 2026 Related Terms Explore More 6 min read NASA’s Webb Discovers Hidden Planet in Famous Star SystemArticle
1 day ago
5 min read NASA’s Hubble Discovers First of Star Cluster’s Missing Black Holes
Astronomers using archival data from Hubble and supportive observations from Webb have located their first…
Article
3 days ago
6 min read NASA Webb Uncovers Unusual Galaxy Shaped by Cosmic Collision
Article
1 week ago
Keep Exploring Discover More Topics From NASA
Missions
Humans in Space
Climate Change
Solar System
How NASA’s Artemis III Lander Test Will Pave Way for Moon Landings
Before Artemis astronauts land on the Moon’s surface in 2028, NASA will conduct the Artemis III demonstration mission in 2027, allowing teams on Earth and in orbit to practice rendezvous and docking operations between commercial human landing systems and the Orion spacecraft. Data from that mission, along with future uncrewed demonstration missions at the Moon, will support astronaut safety and mission success for crewed lunar landings.
NASA is working with two American companies to develop the human landing systems that will safely transport astronauts from lunar orbit to the Moon’s surface and back for future Artemis missions. For Artemis III, both SpaceX and Blue Origin will fly test versions, or test articles, of the crewed landers that will be used for future Moon landings. The lander test articles will launch by commercial rockets, while the Artemis III crew will launch to low Earth orbit in Orion atop the agency’s SLS (Space Launch System) rocket.
Stage setting for crewed flightsNASA and the human landing system providers have been working closely together to plan and determine capabilities for the Artemis III mission. With missions fast approaching, both SpaceX and Blue Origin are optimizing hardware availability and capability. SpaceX plans to use the company’s latest version of Starship and basis of the future Starship HLS, called Version 3, while Blue Origin will test their planned HLS crew cabin, allowing each company to apply lessons learned prior to uncrewed and crewed missions on the Moon.
“Each human landing system provider has taken a different approach to the Artemis III mission,” said Steve Creech, program manager, Human Landing System Program, NASA’s Marshall Space Flight Center in Huntsville, Alabama. “Ultimately, SpaceX and Blue Origin have put forward a list of aggressive objectives and goals intended to complement upcoming uncrewed demonstration missions at the Moon so that we can gain both understanding and confidence in the spacecraft and launch vehicles prior to a crewed landing. The lander prototype designs will inform future development efforts and will continue to mature over the next year.”
For the Artemis III mission, the Blue Moon test lander will be based on Blue Origin’s current architecture for its Mark 2 crew lander, incorporating all the major avionics and flight software and control systems to ensure flight operations from this demonstration mission can directly translate to crewed lunar flights. Up to two crew members, donning orange Orion crew survival system suits, will open the hatch to enter the Blue Origin test lander. The production hardware must incorporate many of the same systems and subsystems, including an Environmental Control and Life Support System (ECLSS), a crew cabin, and avionics.
These artist’s concepts depict Blue Origin’s Blue Moon Mark 2 human landing system test article in Earth orbit and docked with NASA’s Orion spacecraft as part of NASA’s upcoming Artemis III demonstration mission in low Earth orbit. Blue Origin These artist’s concepts depict Blue Origin’s Blue Moon Mark 2 human landing system test article in Earth orbit and docked with NASA’s Orion spacecraft as part of NASA’s upcoming Artemis III demonstration mission in low Earth orbit. Blue OriginThe Blue Origin lander also will fly with an instrumented lunar surface spacesuit mass simulator. Like the suited “Moonikin” manikin that flew aboard Orion during the uncrewed Artemis I test flight, the low-fidelity spacesuit mass simulator will provide real-time feedback about the environment within the Blue Moon crew cabin.
SpaceX’s Starship lander test article will use a Starship Version 3, currently in production and testing, with an added docking system installed on the nose of the 171-foot (52-m) spacecraft, enabling NASA and SpaceX to evaluate how the entire integrated stack of Orion and the Starship test lander interact. NASA and SpaceX are identifying controllability and communications tests for the Artemis III mission. Astronauts will not enter the Starship test lander during Artemis III.
These artist’s concepts depict NASA’s Orion spacecraft and SpaceX’s Starship human landing system test article during docking operations as part of NASA’s upcoming Artemis III demonstration mission in low Earth orbit. SpaceX These artist’s concepts depict NASA’s Orion spacecraft and SpaceX’s Starship human landing system test article during docking operations as part of NASA’s upcoming Artemis III demonstration mission in low Earth orbit. SpaceX Launch cadenceNASA, SpaceX, and Blue Origin will launch three of the world’s most powerful rockets within a short timeframe of one another, exercising ground processing, launch crews, and facilities as well as control centers, networking, and data exchange at key sites across the country during two separate, back-to-back rendezvous and docking maneuvers between Orion and the lander test articles, before a safe splashdown of the Artemis III crew in Orion.
“Artemis III will be a highly choreographed dance with a demanding launch sequence across multiple launch pads and equally demanding mission operations for our ground and flight crews, making it one of the most complex and ambitious missions NASA has ever undertaken,” said Jeremy Parsons, Artemis program manager. “The demonstration mission will set the stage before our next giant leap. NASA’s expertise in systems engineering and integration, as well as launch and mission operations in low Earth orbit, will bring the mission together.”
For future crewed missions to the Moon, NASA and one of the commercial lander partners will execute a “dual launch campaign,” prepositioning the lander in orbit to await a crewed Orion, launched on SLS. Launching the three rockets in succession of one another for Artemis III offers a unique opportunity to practice launch processing and operations.
Blue Origin’s lander test article is planned to launch first and will be able to loiter in space for up to 30 days, allowing for checkouts in orbit prior to the launch of SLS and Orion from Launch Complex 39B at NASA’s Kennedy Space Center in Florida. The Blue Origin test article will launch at a set trajectory to meet a designated “parking” orbit for these systems checks.
Artemis III will be a highly choreographed dance with a demanding launch sequence across multiple launch pads and equally demanding mission operations for our ground and flight crews, making it one of the most complex and ambitious missions NASA has ever undertaken.Jeremy Parsons
Artemis program manager
Following the completion of Blue Origin’s rendezvous and docking operations testing and the Artemis III crewed launch on SLS, SpaceX will launch its Starship lander test article to rendezvous with Orion and its crew for its phase of on-orbit testing.
Throughout the Artemis III mission, Orion will fly in a circular orbit. All three rockets will have more launch opportunities than are available for a lunar mission and will be able to reach the designated mission altitude in a single launch.
Docking operationsDuring docking and undocking operations, Orion and the Artemis III crew will use the lander test articles as the targets, while Orion will operate as the chaser spacecraft. This is the same configuration planned for future crew landing mission to the Moon.
NASA will ensure both test landers are mission ready and crew safe prior to Artemis III. These verifications will be based on functional and performance requirements for the test lander designs and hazard controls for hardware and software, ensuring the Artemis III astronauts inside Orion are safe throughout both docking phases of the mission.
SpaceX and Blue Origin have already tested their docking capabilities for their respective landers on the ground. SpaceX’s docking capability was qualified in 2023; Blue Origin conducted development ground testing on its pressurized docking system earlier this year.
A key difference between the docking capabilities of both lander test articles will be the location of docking. Orion will dock along the side of the Blue Moon test lander, adjacent to the crew cabin. Later, Orion will dock nose-to-nose with the giant SpaceX test lander.
Software testing between spacecrafts will help demonstrate that the commercial human landing system prototypes and Orion can meet at a precise time and location in space. When Orion docks with the Blue Moon test lander, the Orion spacecraft’s software will control the docked spacecraft. Meanwhile, the SpaceX test article will control the docked spacecraft for the second portion of the mission. During the docking phases, teams with NASA and the commercial partners will be able to test hardware and software interoperability, as well as dynamics of how the integrated lander-Orion spacecraft moves in space.
Through the Artemis program, NASA will send astronauts to explore the Moon for scientific discovery, economic benefits, and to build the foundation for the first crewed missions to Mars – for the benefit of all.
News Media ContactAmberJacobson
Headquarters, Washington
240.298.1832
amber.c.jacobson@nasa.gov
Corinne Beckinger
Marshall Space Flight Center, Huntsville, Ala.
256-544-0034
corinne.m.beckinger@nasa.gov
Human Landing System
Artemis III
Artemis
Space Launch System (SLS)
How NASA’s Artemis III Lander Test Will Pave Way for Moon Landings
Before Artemis astronauts land on the Moon’s surface in 2028, NASA will conduct the Artemis III demonstration mission in 2027, allowing teams on Earth and in orbit to practice rendezvous and docking operations between commercial human landing systems and the Orion spacecraft. Data from that mission, along with future uncrewed demonstration missions at the Moon, will support astronaut safety and mission success for crewed lunar landings.
NASA is working with two American companies to develop the human landing systems that will safely transport astronauts from lunar orbit to the Moon’s surface and back for future Artemis missions. For Artemis III, both SpaceX and Blue Origin will fly test versions, or test articles, of the crewed landers that will be used for future Moon landings. The lander test articles will launch by commercial rockets, while the Artemis III crew will launch to low Earth orbit in Orion atop the agency’s SLS (Space Launch System) rocket.
Stage setting for crewed flightsNASA and the human landing system providers have been working closely together to plan and determine capabilities for the Artemis III mission. With missions fast approaching, both SpaceX and Blue Origin are optimizing hardware availability and capability. SpaceX plans to use the company’s latest version of Starship and basis of the future Starship HLS, called Version 3, while Blue Origin will test their planned HLS crew cabin, allowing each company to apply lessons learned prior to uncrewed and crewed missions on the Moon.
“Each human landing system provider has taken a different approach to the Artemis III mission,” said Steve Creech, program manager, Human Landing System Program, NASA’s Marshall Space Flight Center in Huntsville, Alabama. “Ultimately, SpaceX and Blue Origin have put forward a list of aggressive objectives and goals intended to complement upcoming uncrewed demonstration missions at the Moon so that we can gain both understanding and confidence in the spacecraft and launch vehicles prior to a crewed landing. The lander prototype designs will inform future development efforts and will continue to mature over the next year.”
For the Artemis III mission, the Blue Moon test lander will be based on Blue Origin’s current architecture for its Mark 2 crew lander, incorporating all the major avionics and flight software and control systems to ensure flight operations from this demonstration mission can directly translate to crewed lunar flights. Up to two crew members, donning orange Orion crew survival system suits, will open the hatch to enter the Blue Origin test lander. The production hardware must incorporate many of the same systems and subsystems, including an Environmental Control and Life Support System (ECLSS), a crew cabin, and avionics.
These artist’s concepts depict Blue Origin’s Blue Moon Mark 2 human landing system test article in Earth orbit and docked with NASA’s Orion spacecraft as part of NASA’s upcoming Artemis III demonstration mission in low Earth orbit. Blue Origin These artist’s concepts depict Blue Origin’s Blue Moon Mark 2 human landing system test article in Earth orbit and docked with NASA’s Orion spacecraft as part of NASA’s upcoming Artemis III demonstration mission in low Earth orbit. Blue OriginThe Blue Origin lander also will fly with an instrumented lunar surface spacesuit mass simulator. Like the suited “Moonikin” manikin that flew aboard Orion during the uncrewed Artemis I test flight, the low-fidelity spacesuit mass simulator will provide real-time feedback about the environment within the Blue Moon crew cabin.
SpaceX’s Starship lander test article will use a Starship Version 3, currently in production and testing, with an added docking system installed on the nose of the 171-foot (52-m) spacecraft, enabling NASA and SpaceX to evaluate how the entire integrated stack of Orion and the Starship test lander interact. NASA and SpaceX are identifying controllability and communications tests for the Artemis III mission. Astronauts will not enter the Starship test lander during Artemis III.
These artist’s concepts depict NASA’s Orion spacecraft and SpaceX’s Starship human landing system test article during docking operations as part of NASA’s upcoming Artemis III demonstration mission in low Earth orbit. SpaceX These artist’s concepts depict NASA’s Orion spacecraft and SpaceX’s Starship human landing system test article during docking operations as part of NASA’s upcoming Artemis III demonstration mission in low Earth orbit. SpaceX Launch cadenceNASA, SpaceX, and Blue Origin will launch three of the world’s most powerful rockets within a short timeframe of one another, exercising ground processing, launch crews, and facilities as well as control centers, networking, and data exchange at key sites across the country during two separate, back-to-back rendezvous and docking maneuvers between Orion and the lander test articles, before a safe splashdown of the Artemis III crew in Orion.
“Artemis III will be a highly choreographed dance with a demanding launch sequence across multiple launch pads and equally demanding mission operations for our ground and flight crews, making it one of the most complex and ambitious missions NASA has ever undertaken,” said Jeremy Parsons, Artemis program manager. “The demonstration mission will set the stage before our next giant leap. NASA’s expertise in systems engineering and integration, as well as launch and mission operations in low Earth orbit, will bring the mission together.”
For future crewed missions to the Moon, NASA and one of the commercial lander partners will execute a “dual launch campaign,” prepositioning the lander in orbit to await a crewed Orion, launched on SLS. Launching the three rockets in succession of one another for Artemis III offers a unique opportunity to practice launch processing and operations.
Blue Origin’s lander test article is planned to launch first and will be able to loiter in space for up to 30 days, allowing for checkouts in orbit prior to the launch of SLS and Orion from Launch Complex 39B at NASA’s Kennedy Space Center in Florida. The Blue Origin test article will launch at a set trajectory to meet a designated “parking” orbit for these systems checks.
Artemis III will be a highly choreographed dance with a demanding launch sequence across multiple launch pads and equally demanding mission operations for our ground and flight crews, making it one of the most complex and ambitious missions NASA has ever undertaken.Jeremy Parsons
Artemis program manager
Following the completion of Blue Origin’s rendezvous and docking operations testing and the Artemis III crewed launch on SLS, SpaceX will launch its Starship lander test article to rendezvous with Orion and its crew for its phase of on-orbit testing.
Throughout the Artemis III mission, Orion will fly in a circular orbit. All three rockets will have more launch opportunities than are available for a lunar mission and will be able to reach the designated mission altitude in a single launch.
Docking operationsDuring docking and undocking operations, Orion and the Artemis III crew will use the lander test articles as the targets, while Orion will operate as the chaser spacecraft. This is the same configuration planned for future crew landing mission to the Moon.
NASA will ensure both test landers are mission ready and crew safe prior to Artemis III. These verifications will be based on functional and performance requirements for the test lander designs and hazard controls for hardware and software, ensuring the Artemis III astronauts inside Orion are safe throughout both docking phases of the mission.
SpaceX and Blue Origin have already tested their docking capabilities for their respective landers on the ground. SpaceX’s docking capability was qualified in 2023; Blue Origin conducted development ground testing on its pressurized docking system earlier this year.
A key difference between the docking capabilities of both lander test articles will be the location of docking. Orion will dock along the side of the Blue Moon test lander, adjacent to the crew cabin. Later, Orion will dock nose-to-nose with the giant SpaceX test lander.
Software testing between spacecrafts will help demonstrate that the commercial human landing system prototypes and Orion can meet at a precise time and location in space. When Orion docks with the Blue Moon test lander, the Orion spacecraft’s software will control the docked spacecraft. Meanwhile, the SpaceX test article will control the docked spacecraft for the second portion of the mission. During the docking phases, teams with NASA and the commercial partners will be able to test hardware and software interoperability, as well as dynamics of how the integrated lander-Orion spacecraft moves in space.
Through the Artemis program, NASA will send astronauts to explore the Moon for scientific discovery, economic benefits, and to build the foundation for the first crewed missions to Mars – for the benefit of all.
News Media ContactAmberJacobson
Headquarters, Washington
240.298.1832
amber.c.jacobson@nasa.gov
Corinne Beckinger
Marshall Space Flight Center, Huntsville, Ala.
256-544-0034
corinne.m.beckinger@nasa.gov
Human Landing System
Artemis III
Artemis
Space Launch System (SLS)
Anil Menon Launches to Space Station
Anil Menon Launches to Space Station
NASA astronaut candidate Anna Menon and her children watch as a Soyuz rocket launches to the International Space Station with NASA astronaut Anil Menon and Roscosmos cosmonauts Pyotr Dubrov and Anna Kikina, Tuesday, July 14, 2026, at the Baikonur Cosmodrome in Kazakhstan. The trio lifted off for the Soyuz MS-29 mission at 7:47 p.m. local time to begin their long-duration stay aboard the orbital outpost.
During his stay on the station, Menon will conduct scientific research and technology demonstrations aimed at advancing human space exploration and benefiting life on Earth.
Image credit: NASA/John Kraus
Anil Menon Launches to Space Station
NASA astronaut candidate Anna Menon and her children watch as a Soyuz rocket launches to the International Space Station with NASA astronaut Anil Menon and Roscosmos cosmonauts Pyotr Dubrov and Anna Kikina, Tuesday, July 14, 2026, at the Baikonur Cosmodrome in Kazakhstan. The trio lifted off for the Soyuz MS-29 mission at 7:47 p.m. local time to begin their long-duration stay aboard the orbital outpost.
During his stay on the station, Menon will conduct scientific research and technology demonstrations aimed at advancing human space exploration and benefiting life on Earth.
Image credit: NASA/John Kraus
Curiosity Finds Evidence of an Ancient Sandstorm
PNG (7.32 MB)
DescriptionBillions of years ago, an hours-long Martian sandstorm blew so intensely that sand ripples began to climb upon one another as they moved across the surface. These layers of sediment eventually hardened into the multilayered rocks seen in this image, which was taken by NASA’s Curiosity rover on Dec. 12, 2024, the 4,391st Martian day, or sol, of the mission.
Scientists believe this is the first evidence of climbing wind ripple strata on the Red Planet. Spotted at a location nicknamed “Jawbone Canyon,” these rocks are a rare time capsule preserving a dramatic wind event early in Martian history. A paper detailing the discovery was featured on the cover of the journal Geology on July 1, 2026.
Keep Exploring Discover More Topics From PhotojournalPhotojournal
Search Photojournal
Photojournal’s Latest Content
Feedback
Curiosity Finds Evidence of an Ancient Sandstorm
PNG (7.32 MB)
DescriptionBillions of years ago, an hours-long Martian sandstorm blew so intensely that sand ripples began to climb upon one another as they moved across the surface. These layers of sediment eventually hardened into the multilayered rocks seen in this image, which was taken by NASA’s Curiosity rover on Dec. 12, 2024, the 4,391st Martian day, or sol, of the mission.
Scientists believe this is the first evidence of climbing wind ripple strata on the Red Planet. Spotted at a location nicknamed “Jawbone Canyon,” these rocks are a rare time capsule preserving a dramatic wind event early in Martian history. A paper detailing the discovery was featured on the cover of the journal Geology on July 1, 2026.
Keep Exploring Discover More Topics From PhotojournalPhotojournal
Search Photojournal
Photojournal’s Latest Content
Feedback
Scientists discover a ‘remarkable’ new monkey species with orange lips and a froglike roar
The new species, Colobus congoensis, may already be endangered
NASA’s Perseverance Rover Provides Sweeping View of Broom Point
PNG (16.27 MB)
PIA26755 Figure APNG (16.15 MB)
DescriptionThis view looking back up at the outside lip of the 490-foot-tall (150-meter-tall) rim of Jezero Crater was taken by the Mastcam-Z instrument aboard NASA’s Perseverance on May 15, 2025, the 1,505th day, or sol, of the rover’s mission to Mars.
The bright-colored rocks exposed across the slope, running from middle left to middle right of the image, belong to a formation the science team calls the “Broom Point member,” a 245-foot-thick (75-meter-thick) stack of ancient rock. This sequence of layered bedrock is likely more than 3.9 billion years old, making it among the oldest terrain ever examined by a Mars rover. Evidence uncovered by Perseverance indicates this thick section of rock was built by repeated asteroid strikes, with layers tilting at nearly vertical angles exceeding 80 degrees due to the subsequent colossal impacts that created the Isidis Basin and Jezero Crater.
The rover’s tracks are visible in the image, showing Perseverance’s descent of the steep crater rim slope.
Figure A
Figure A includes annotations:
- Dashed yellow lines indicate upper and lower boundaries of the Broom Point member
- Black lines indicate rover traverses
- White circles indicate locations rover stopped for science collection
- Red icons indicate locations of cored samples collected by Perseverance: “Bell Island” on April 22, 2025 (Sol 1,483) and “Main River” on March 10, 2025 (Sol 1,441)
NASA’s Jet Propulsion Laboratory, which is managed for the agency by Caltech in Pasadena, California, built and manages operations of the Perseverance rover. Arizona State University leads the operations of the Mastcam-Z instrument, working in collaboration with Malin Space Science Systems in San Diego, on the design, fabrication, testing, and operation of the cameras, and in collaboration with the Niels Bohr Institute of the University of Copenhagen on the design, fabrication, and testing of the calibration targets.
For more about Perseverance: science.nasa.gov/mission/mars-2020-perseverance/
Keep Exploring Discover More Topics From PhotojournalPhotojournal
Search Photojournal
Photojournal’s Latest Content
Feedback
NASA’s Perseverance Rover Provides Sweeping View of Broom Point
PNG (16.27 MB)
PIA26755 Figure APNG (16.15 MB)
DescriptionThis view looking back up at the outside lip of the 490-foot-tall (150-meter-tall) rim of Jezero Crater was taken by the Mastcam-Z instrument aboard NASA’s Perseverance on May 15, 2025, the 1,505th day, or sol, of the rover’s mission to Mars.
The bright-colored rocks exposed across the slope, running from middle left to middle right of the image, belong to a formation the science team calls the “Broom Point member,” a 245-foot-thick (75-meter-thick) stack of ancient rock. This sequence of layered bedrock is likely more than 3.9 billion years old, making it among the oldest terrain ever examined by a Mars rover. Evidence uncovered by Perseverance indicates this thick section of rock was built by repeated asteroid strikes, with layers tilting at nearly vertical angles exceeding 80 degrees due to the subsequent colossal impacts that created the Isidis Basin and Jezero Crater.
The rover’s tracks are visible in the image, showing Perseverance’s descent of the steep crater rim slope.
Figure AFigure A includes annotations:
- Dashed yellow lines indicate upper and lower boundaries of the Broom Point member
- Black lines indicate rover traverses
- White circles indicate locations rover stopped for science collection
- Red icons indicate locations of cored samples collected by Perseverance: “Bell Island” on April 22, 2025 (Sol 1,483) and “Main River” on March 10, 2025 (Sol 1,441)
NASA’s Jet Propulsion Laboratory, which is managed for the agency by Caltech in Pasadena, California, built and manages operations of the Perseverance rover. Arizona State University leads the operations of the Mastcam-Z instrument, working in collaboration with Malin Space Science Systems in San Diego, on the design, fabrication, testing, and operation of the cameras, and in collaboration with the Niels Bohr Institute of the University of Copenhagen on the design, fabrication, and testing of the calibration targets.
For more about Perseverance: science.nasa.gov/mission/mars-2020-perseverance/
Keep Exploring Discover More Topics From PhotojournalPhotojournal
Search Photojournal
Photojournal’s Latest Content
Feedback
How to avoid getting cyclosporiasis—and why washing lettuce may not be enough
Case numbers of this parasite-caused illness have exploded in the last week. An expert explains how to try and stay safe
Perseverance’s Trip to ‘Broom Point’
PNG (16.62 MB)
DescriptionThis orbital map shows the path NASA’s Perseverance Mars rover took to get to a location the science team has dubbed the “Broom Point member,” a sequence of layered bedrock likely more than 3.9 billion years old. As planned, the rover landed inside Jezero Crater on Feb. 18, 2021. It investigated the crater’s western delta and inlet river valley, Neretva Vallis, before summiting the crater rim in December 2024 following a rim-to-crest climb of 2,620 feet (800 meters).
The Broom Point region is situated on the outer edge of the crater rim and was visited by the rover in mid-2025. The yellow dot indicates location where the rover took a selfie.
NASA’s Jet Propulsion Laboratory, which is managed for the agency by Caltech in Pasadena, California, built and manages operations of the Perseverance rover. Arizona State University leads the operations of the Mastcam-Z instrument, working in collaboration with Malin Space Science Systems in San Diego, on the design, fabrication, testing, and operation of the cameras, and in collaboration with the Niels Bohr Institute of the University of Copenhagen on the design, fabrication, and testing of the calibration targets.
For more about Perseverance: science.nasa.gov/mission/mars-2020-perseverance/
JPL manages the Mars Reconnaissance Orbiter for NASA’s Science Mission Directorate in Washington as part of NASA’s Mars Exploration Program portfolio. Lockheed Martin Space in Denver built MRO and supports its operations. The University of Arizona, in Tucson, operates HiRISE, which was built by Ball Aerospace & Technologies Corp., in Boulder, Colorado.
For more information, visit:
science.nasa.gov/mission/mars-reconnaissance-orbiter
Keep Exploring Discover More Topics From PhotojournalPhotojournal
Search Photojournal
Photojournal’s Latest Content
Feedback
Perseverance’s Trip to ‘Broom Point’
PNG (16.62 MB)
DescriptionThis orbital map shows the path NASA’s Perseverance Mars rover took to get to a location the science team has dubbed the “Broom Point member,” a sequence of layered bedrock likely more than 3.9 billion years old. As planned, the rover landed inside Jezero Crater on Feb. 18, 2021. It investigated the crater’s western delta and inlet river valley, Neretva Vallis, before summiting the crater rim in December 2024 following a rim-to-crest climb of 2,620 feet (800 meters).
The Broom Point region is situated on the outer edge of the crater rim and was visited by the rover in mid-2025. The yellow dot indicates location where the rover took a selfie.
NASA’s Jet Propulsion Laboratory, which is managed for the agency by Caltech in Pasadena, California, built and manages operations of the Perseverance rover. Arizona State University leads the operations of the Mastcam-Z instrument, working in collaboration with Malin Space Science Systems in San Diego, on the design, fabrication, testing, and operation of the cameras, and in collaboration with the Niels Bohr Institute of the University of Copenhagen on the design, fabrication, and testing of the calibration targets.
For more about Perseverance: science.nasa.gov/mission/mars-2020-perseverance/
JPL manages the Mars Reconnaissance Orbiter for NASA’s Science Mission Directorate in Washington as part of NASA’s Mars Exploration Program portfolio. Lockheed Martin Space in Denver built MRO and supports its operations. The University of Arizona, in Tucson, operates HiRISE, which was built by Ball Aerospace & Technologies Corp., in Boulder, Colorado.
For more information, visit:
science.nasa.gov/mission/mars-reconnaissance-orbiter
Keep Exploring Discover More Topics From PhotojournalPhotojournal
Search Photojournal
Photojournal’s Latest Content
Feedback
Mathematicians are closing in on the hidden order inside chaos
A new breakthrough pushes the limits of randomness, bringing a decades-old mathematical mystery closer to resolution
Observers Beware: Reflect Orbital’s Space Mirrors Approved for Launch
The Federal Communications Commission (FCC) has approved the launch of Reflect Orbital's Earendil 1 satellite — a space mirror 18 meters wide designed to reflect sunlight to the ground.
The post Observers Beware: Reflect Orbital’s Space Mirrors Approved for Launch appeared first on Sky & Telescope.
What's It Like to Travel Near the Speed of Light? Part 1: The Broken View
You can't ride alongside a beam of light, and the reason why opens a door onto the strangest parts of relativity. A tour of rest frames, why a photon has no point of view, and how your speed reshapes reality itself.
Spiral Arms and Bars are Galactic Fuel Pumps for Star Formation
Astronomers thought that early galaxies were messy, clumpy, and turbulent from mergers. That means their gas was all stirred up. So what could explain the rapid star formation during the Cosmic Noon? New research shows that galaxies had well-ordered morphologies earlier than thought, and that their spiral arms and bars allowed gas to flow freely, forming more stars.
NASA’s Perseverance Rover Reads Record of Ancient Mars Impacts
5 min read
Preparations for Next Moonwalk Simulations Underway (and Underwater) NASA’s Perseverance took this selfie at “Witch Hazel Hill” on Jezero Crater’s rim on May 10, 2025. The small dark hole in the rock in front of the rover is the borehole made when the rover collected the “Bell Island” sample. The small puff of dust left of center and below the horizon line is a dust devil.NASA/JPL-Caltech/MSSS
NASA’s Perseverance Mars rover has uncovered evidence that a 245-foot-thick (75-meter-thick) stack of ancient rock on the rim of Jezero Crater was built by repeated asteroid impacts. Referred to as the “Broom Point member” by the rover’s science team, this sequence of layered bedrock is likely more than 3.9 billion years old, making it among the oldest terrain ever examined by a Mars rover.
Released Wednesday in the Journal of Geophysical Research: Planets, the findings offer a window into one of the most tumultuous chapters in the history of the solar system.
“Since leaving Jezero, Perseverance has been exploring a brand-new frontier, both geographically and geologically — a chapter of Martian time that predates the crater itself,” said Ken Farley, Perseverance deputy project scientist at Caltech in Pasadena, California. “On Earth, our earliest geologic history has been fundamentally broken up, deformed, and erased by plate tectonics. Because Mars lacks plate tectonics to recycle its crust, this ancient record remains intact, giving us a rare glimpse into a geological time period that doesn’t exist on our own planet.”
Reading between layersAfter ascending the western rim of Jezero Crater in late 2024, Perseverance began examining surrounding locations with its science instruments. Their data at Broom Point revealed six distinct rock types, including breccias — rocks composed of angular fragments — alternating with layers of fine-grained, pulverized rock dust. Rock fragments within the breccias are pocked with gas-bubble cavities, indicating they were once molten.
The presence of tiny, dark, glassy beads within the layers offered an important clue about how these rocks formed. While volcanoes can produce similar glassy droplets, they rarely occur in such high abundance, pointing to asteroid impacts, instead, as the primary architect. In fact, the largest beads rival those flung out by the dinosaur-killing Chicxulub asteroid’s impact on Earth.
NASA’s Perseverance rover captured its own tracks descending from the rim of Jezero Crater. The bright-colored rocks running from middle left to middle right of the image, a formation dubbed the “Broom Point member,” are likely more than 3.9 billion years old, making them among the oldest terrain ever examined by a Mars rover.NASA/JPL-Caltech/ASU/MSSS
The repetition of these distinct rock types multiple times throughout this thick sequence of rock indicates that high-energy impact events happened again and again across this region of early Mars.
“The different rock layers are a record of variable-sized impacts occurring at different distances from where this rock sequence was accumulating,” said Alex Jones, a Ph.D. student in planetary geology at Imperial College London and lead author of the paper. “Some large impacts took place very far away, some small impacts nearby. Their debris all ended up landing here, constructing this thick section of rock.”
How these layers formed may suggest an interaction with water or ice. Several of the layers look like they may have been formed by fast, ground-hugging debris flows. On Earth, these powerful, fluidlike surges can occur when molten rock hits water or ice that instantly flashes into steam.
Cosmic one-two punchSome of Broom Point’s layers tilt at angles exceeding 80 degrees — nearly vertical — which is far too steep to be caused by the impact that created Jezero Crater.
Instead, scientists suspect a cosmic “one-two punch” shaped this landscape long ago. First, a colossal asteroid impact created the 1,200-mile-wide (1,900-kilometer-wide) Isidis Basin, one of the largest impact basins on Mars, upending and tilting the once-flat rock layers. Later, a second asteroid likely struck, forming Jezero Crater, which measures 28 miles (45 kilometers) across. This second impact fractured and uplifted the already-tilted rocks into the dramatic formations the rover sees today.
To pin down exactly when these events took place, the Perseverance team collected two core samples, dubbed “Bell Island” and “Main River.” If a future mission were to return them to Earth, laboratory dating could determine when and how often impacts were occurring on early Mars — and, by extension, the infant Earth, whose own early impact record has been erased by billions of years of plate tectonics.
“During this violent era, it wasn’t rain or snow falling from the sky, but an almost constant barrage of molten rock droplets and pulverized dust kicked up by asteroid impacts,” said Jones. “If we can pin down the ages of these layers, it would be like reading a cosmic weather report from 4 billion years ago.”
This orbital map shows the path NASA’s Perseverance Mars rover took from its 2021 landing site in Jezero Crater to the “Broom Point” location in mid-2025.NASA/JPL-Caltech/MRO/HIRISE/UA/ICL More about Perseverance
NASA’s Jet Propulsion Laboratory in Southern California, which is managed for the agency by Caltech, built and manages operations of the Perseverance rover on behalf of the agency’s Science Mission Directorate in Washington, as part of NASA’s Mars Exploration Program portfolio. Arizona State University leads the operations of the rover’s Mastcam-Z instrument, working in collaboration with Malin Space Science Systems in San Diego, on the design, fabrication, testing, and operation of the cameras. SuperCam is led by Los Alamos National Laboratory in New Mexico, where the instrument’s Body Unit was developed. The rover’s SHERLOC (Scanning Habitable Environments with Raman and Luminescence for Organics and Chemicals) instrument was built at NASA JPL, and its WATSON (Wide Angle Topographic Sensor for Operations and eNgineering) camera was built at Malin Space Science Systems.
For more information on NASA’s Perseverance, visit:
https://science.nasa.gov/mission/mars-2020-perseverance
News Media Contacts
DC Agle
Jet Propulsion Laboratory, Pasadena, Calif.
818-393-9011
agle@jpl.nasa.gov
Karen Fox / Alana Johnson
NASA Headquarters, Washington
240-285-5155 / 202-672-4780
karen.c.fox@nasa.gov / alana.r.johnson@nasa.gov
2026-045
Share Details Last Updated Jul 15, 2026 Related Terms Explore More 6 min read NASA Study of Pristine Meteorite Adds to Story of Ancient AsteroidsA meteorite recovered immediately upon its fall to Earth on July 16, 2024, is helping…
Article 20 hours ago 4 min read Where Venezuela’s Earthquakes Shifted the GroundRadar data from the NISAR satellite show that La Guaira and nearby areas experienced significant…
Article 6 days ago 3 min read NASA’s New Horizons Spacecraft Wakes from Hibernation in Good HealthFollowing its longest hibernation period ever of nearly a year, NASA’s New Horizons spacecraft has…
Article 1 week ago Keep Exploring Discover Related Topics Mars 2020: Perseverance RoverNASA’s Mars Perseverance rover seeks signs of ancient life and collects samples of rock and regolith for possible Earth return.
Asteroids, Comets & MeteorsAsteroids, comets, and meteoroids are chunks of rock, ice, and metal left over from the formation of our solar system…
Mars ExplorationMars is the only planet we know of inhabited entirely by robots. Learn more about the Mars Missions.
Planetary ScienceNASA’s planetary science program explores the objects in our solar system to better understand its history and the distribution of…
NASA’s Perseverance Rover Reads Record of Ancient Mars Impacts
5 min read
Preparations for Next Moonwalk Simulations Underway (and Underwater) NASA’s Perseverance took this selfie at “Witch Hazel Hill” on Jezero Crater’s rim on May 10, 2025. The small dark hole in the rock in front of the rover is the borehole made when the rover collected the “Bell Island” sample. The small puff of dust left of center and below the horizon line is a dust devil.NASA/JPL-Caltech/MSSSNASA’s Perseverance Mars rover has uncovered evidence that a 245-foot-thick (75-meter-thick) stack of ancient rock on the rim of Jezero Crater was built by repeated asteroid impacts. Referred to as the “Broom Point member” by the rover’s science team, this sequence of layered bedrock is likely more than 3.9 billion years old, making it among the oldest terrain ever examined by a Mars rover.
Released Wednesday in the Journal of Geophysical Research: Planets, the findings offer a window into one of the most tumultuous chapters in the history of the solar system.
“Since leaving Jezero, Perseverance has been exploring a brand-new frontier, both geographically and geologically — a chapter of Martian time that predates the crater itself,” said Ken Farley, Perseverance deputy project scientist at Caltech in Pasadena, California. “On Earth, our earliest geologic history has been fundamentally broken up, deformed, and erased by plate tectonics. Because Mars lacks plate tectonics to recycle its crust, this ancient record remains intact, giving us a rare glimpse into a geological time period that doesn’t exist on our own planet.”
Reading between layersAfter ascending the western rim of Jezero Crater in late 2024, Perseverance began examining surrounding locations with its science instruments. Their data at Broom Point revealed six distinct rock types, including breccias — rocks composed of angular fragments — alternating with layers of fine-grained, pulverized rock dust. Rock fragments within the breccias are pocked with gas-bubble cavities, indicating they were once molten.
The presence of tiny, dark, glassy beads within the layers offered an important clue about how these rocks formed. While volcanoes can produce similar glassy droplets, they rarely occur in such high abundance, pointing to asteroid impacts, instead, as the primary architect. In fact, the largest beads rival those flung out by the dinosaur-killing Chicxulub asteroid’s impact on Earth.
NASA’s Perseverance rover captured its own tracks descending from the rim of Jezero Crater. The bright-colored rocks running from middle left to middle right of the image, a formation dubbed the “Broom Point member,” are likely more than 3.9 billion years old, making them among the oldest terrain ever examined by a Mars rover.NASA/JPL-Caltech/ASU/MSSSThe repetition of these distinct rock types multiple times throughout this thick sequence of rock indicates that high-energy impact events happened again and again across this region of early Mars.
“The different rock layers are a record of variable-sized impacts occurring at different distances from where this rock sequence was accumulating,” said Alex Jones, a Ph.D. student in planetary geology at Imperial College London and lead author of the paper. “Some large impacts took place very far away, some small impacts nearby. Their debris all ended up landing here, constructing this thick section of rock.”
How these layers formed may suggest an interaction with water or ice. Several of the layers look like they may have been formed by fast, ground-hugging debris flows. On Earth, these powerful, fluidlike surges can occur when molten rock hits water or ice that instantly flashes into steam.
Cosmic one-two punchSome of Broom Point’s layers tilt at angles exceeding 80 degrees — nearly vertical — which is far too steep to be caused by the impact that created Jezero Crater.
Instead, scientists suspect a cosmic “one-two punch” shaped this landscape long ago. First, a colossal asteroid impact created the 1,200-mile-wide (1,900-kilometer-wide) Isidis Basin, one of the largest impact basins on Mars, upending and tilting the once-flat rock layers. Later, a second asteroid likely struck, forming Jezero Crater, which measures 28 miles (45 kilometers) across. This second impact fractured and uplifted the already-tilted rocks into the dramatic formations the rover sees today.
To pin down exactly when these events took place, the Perseverance team collected two core samples, dubbed “Bell Island” and “Main River.” If a future mission were to return them to Earth, laboratory dating could determine when and how often impacts were occurring on early Mars — and, by extension, the infant Earth, whose own early impact record has been erased by billions of years of plate tectonics.
“During this violent era, it wasn’t rain or snow falling from the sky, but an almost constant barrage of molten rock droplets and pulverized dust kicked up by asteroid impacts,” said Jones. “If we can pin down the ages of these layers, it would be like reading a cosmic weather report from 4 billion years ago.”
This orbital map shows the path NASA’s Perseverance Mars rover took from its 2021 landing site in Jezero Crater to the “Broom Point” location in mid-2025.NASA/JPL-Caltech/MRO/HIRISE/UA/ICL More about PerseveranceNASA’s Jet Propulsion Laboratory in Southern California, which is managed for the agency by Caltech, built and manages operations of the Perseverance rover on behalf of the agency’s Science Mission Directorate in Washington, as part of NASA’s Mars Exploration Program portfolio. Arizona State University leads the operations of the rover’s Mastcam-Z instrument, working in collaboration with Malin Space Science Systems in San Diego, on the design, fabrication, testing, and operation of the cameras. SuperCam is led by Los Alamos National Laboratory in New Mexico, where the instrument’s Body Unit was developed. The rover’s SHERLOC (Scanning Habitable Environments with Raman and Luminescence for Organics and Chemicals) instrument was built at NASA JPL, and its WATSON (Wide Angle Topographic Sensor for Operations and eNgineering) camera was built at Malin Space Science Systems.
For more information on NASA’s Perseverance, visit:
https://science.nasa.gov/mission/mars-2020-perseverance
News Media Contacts
DC Agle
Jet Propulsion Laboratory, Pasadena, Calif.
818-393-9011
agle@jpl.nasa.gov
Karen Fox / Alana Johnson
NASA Headquarters, Washington
240-285-5155 / 202-672-4780
karen.c.fox@nasa.gov / alana.r.johnson@nasa.gov
2026-045
Share Details Last Updated Jul 15, 2026 Related Terms Explore More 3 min read NASA’s New Horizons Spacecraft Wakes from Hibernation in Good HealthFollowing its longest hibernation period ever of nearly a year, NASA’s New Horizons spacecraft has…
Article 1 week ago 3 min read What’s Up: July 2026 Skywatching Tips from NASAA predawn Moon-and-planets meetup, a returning comet, a great chance to see the Milky Way,…
Article 2 weeks ago 6 min read NASA’s Webb Studies How Planet Survived Death of its StarNASA’s James Webb Space Telescope is giving us new insight into the far-future of solar…
Article 2 weeks ago Keep Exploring Discover Related Topics Mars 2020: Perseverance RoverNASA’s Mars Perseverance rover seeks signs of ancient life and collects samples of rock and regolith for possible Earth return.
Asteroids, Comets & MeteorsAsteroids, comets, and meteoroids are chunks of rock, ice, and metal left over from the formation of our solar system…
Mars ExplorationMars is the only planet we know of inhabited entirely by robots. Learn more about the Mars Missions.
Planetary ScienceNASA’s planetary science program explores the objects in our solar system to better understand its history and the distribution of…